1 . 8 0 0 . 6 4 5 . 0 1 0 1
HOME /

PRODUCTS

American Valve, Inc.
P.O. Box 35229
Greensboro, NC 27425
MODEL 3700
3700 SERIES
Cast iron flanged ball valve with Teflon® fused ball
The new American Valve model 3700 features an epoxy-coated cast iron body and the same patented TEFLON® fused ball as the 4000 series. It inhibits buildup that accumulates on unprotected ball surfaces and prevents premature valve failure. The same ANSI B16.10 end-to-end dimensions as flanged gate and plug valves makes this one an easy decision.

Model 3700 is ideally suited for backflow prevention devices and potable water applications. All model 3700 valves are rated 200W at 200°F, and are available in full port from sizes 2" through 8". With no disc or obstruction in the line, model 3700 easily out-performs any butterfly valve.
Click here for catalog.

Zero Lead
Zero Flow obstruction in the open position
Zero leak rate in the closed position
Easy to operate
Typical Gate Valve
Class IV Allowable Leak-Rate
Class VI Positive Shut-off
Same End-to-End Dimensions as Model 3700
(ANSI B16.10)
Same End-to-End Dimensions as Class 125 or 150 Gate Valve (ANSI B16.10)
Unprotected Metal Gate
–Notorious as a magnet for buildup and mineral deposits, making full shutoff impossible. Should come with a cheater bar.
Patented Teflon®-Fused Ball
–Prevents Calcium, Lime, or any other buildup common in water applications, which often leads to premature valve failure.
Heavy & Awkward
–Requires “Big Joe” to Install
–Typical 3” Gate Valve = 72 lbs.
–Typical 6” Gate Valve = 197 lbs.
Lightweight & Compact
–Easy to Install
–3” 3700 = 35 lbs.
–6” 3700 = 113 lbs.
Contains Bronze parts...which contain Lead. (Lead has been shown to cause birth defects and damage to the nervous system- even in small doses)
100% Lead-Free
–No bronze parts
 © 2006 American Valve, Inc, all rights reserved
Teflon
® is a registered trademark of Dupont